I'm looking to make a fence for the router table Bob kindly gave me. It will be something very similar to the Norm fence / Steve Ramsey fence, so nothing very exotic.
I have some offcuts of melamine covered mdf board that I made sure our kitchen fitters left when they finished our kitchen a while back, so I'm planning to use that for the adjustable secondary fence sections, but it is only 14mm thick and therefore I think too thin to sink any T- Track into. I also have some 9mm mdf and I therefore thought I would make a laminated piece using these two, but before doing this wanted to check if anyone can say for sure whether normal wood glue will work in sticking the melamine surface (board covered on both sides) to the mdf. Thoughts, experience or suggestions much appreciated.
Terry.