Page 1 of 1

Drawer hardware

PostPosted: 06 Jan 2017, 10:05
by woodstalker
Had a look through the links in the Dropbox spreadsheet for recommended suppliers but couldn't see one for drawer hardware; specifically the drawer slides.

I'm after some for a chest of drawers to keep clothes in. Nothing too fancy but I didn't want to end up with something really cheap and nasty that don't operate very well and then break in the short term.

Also anyone seen a guide for working out what size you need, the differences between full extension and standard,etc.?

Appreciate this had probably been asked before and I did do a forum search which showed plenty of WIP but not where the forum poster got them from.

Many thanks

James

Re: Drawer hardware

PostPosted: 06 Jan 2017, 11:21
by 9fingers
James,

I've used Buller for drawer slides many time before.
Good service and quality products

http://www.bullerltd.co.uk/drawer-runners/


HTH

Bob

Re: Drawer hardware

PostPosted: 06 Jan 2017, 18:34
by woodstalker
9fingers wrote:James,

I've used Buller for drawer slides many time before.
Good service and quality products

http://www.bullerltd.co.uk/drawer-runners/


HTH

Bob


Thanks Bob i will have a look at their site. :D

edit: thanks Bob, thats exactly what i was after.

Re: Drawer hardware

PostPosted: 06 Jan 2017, 20:56
by Robert
I've used buller before but these are my drawer slides of choice now -

http://www.ebay.co.uk/itm/201029536544? ... EBIDX%3AIT

Image

Nice gliding action, soft close and pretty easy to fit with good tolerance to slightly off sizes. also dead easy to unlatch and remove the drawer.

Bought from that seller a couple of times now.

Their non ebay site may be cheaper depending on qty and delivery cost

http://www.jsfurniture.co.uk/furniture- ... nners.html

Re: Drawer hardware

PostPosted: 06 Jan 2017, 21:42
by woodstalker
Robert wrote:I've used buller before but these are my drawer slides of choice now -

http://www.ebay.co.uk/itm/201029536544? ... EBIDX%3AIT

Image

Nice gliding action, soft close and pretty easy to fit with good tolerance to slightly off sizes. also dead easy to unlatch and remove the drawer.

Bought from that seller a couple of times now.

Their non ebay site may be cheaper depending on qty and delivery cost

http://www.jsfurniture.co.uk/furniture- ... nners.html


Thanks Robert, another good recommendation.

Re: Drawer hardware

PostPosted: 06 Jan 2017, 21:49
by 9fingers
Seeing the GTV logo on Roberts post reminded me that some of the runners from Buller came marked GTV.

Also I see that Buller are running an ebay shop now.

Bob