Is the micro adjuster an oversized hole for the bolt at the far end?
That's it Andy. The screw closest to the camera is an old fashioned No10 steel screw with a long plain shank. This is a 'righty tighty' squeaky fit in it's countersunk hole and the screw acts as a pivot for the fence. The fixing at the other end is a 6mm coach screw/chunky washer in an 8mm hole, thus giving 1mm of wiggle room either way.
Once the coach screw is lightly bolted down, it's easy to set the fence with a tapometer and once it's spot on, lock it down with a further half turn..a couple of shavings on a test piece will show if the setting's out or good. After a while, the fence will move slightly, but it's easy to correct - Rob
I work for Axminster Tools & Machinery. I will comment as appropriate on aspects or products to do with my employment.