It is currently 29 Mar 2024, 11:11

Is Cyclone Central still up and running?

Here's the place to talk about all your table saws, bandsaws, routers and dust extractors. In fact anything that makes noise and uses electrickery.

Is Cyclone Central still up and running?

Postby Wizard9999 » 14 Sep 2015, 14:36

Now I have my extractor I have been casting my eye around to look at cyclone options. I remembered several people on here had got there's from Cyclone Central, but when I looked every single item in the store is out of stock, which gives me the impression that they may well have stopped operating.

Terry.
Wizard9999
Old Oak
 
Posts: 1409
Joined: 08 Aug 2014, 11:51
Location: Eversley, Hampshire
Name: Lord Radford

Re: Is Cyclone Central still up and running?

Postby DaveL » 14 Sep 2015, 14:51

I think the chap who was running it was going back to university, so he may of put production on hold.
Regards,
Dave
My tool kit is almost complete, only a few more to get.
User avatar
DaveL
Old Oak
 
Posts: 1918
Joined: 21 Jul 2014, 21:07
Location: Sudbury, Suffolk
Name: Dave

Re: Is Cyclone Central still up and running?

Postby Wizard9999 » 14 Sep 2015, 14:52

Thanks Dave, well it is one less option to have to consider, which given my tendency to prevarication is probably a good thing :lol: .

Terry.
Wizard9999
Old Oak
 
Posts: 1409
Joined: 08 Aug 2014, 11:51
Location: Eversley, Hampshire
Name: Lord Radford

Re: Is Cyclone Central still up and running?

Postby 9fingers » 14 Sep 2015, 15:34

He is a member here - "Chems" although I have found him very slow to respond to PMs in the past.

Bob
Information on induction motors here
https://drive.google.com/file/d/1dBTVXx ... sp=sharing
Email:motors@minchin.org.uk
User avatar
9fingers
Petrified Pine
 
Posts: 10039
Joined: 21 Jul 2014, 20:22
Location: Romsey Hampshire between Southampton and the New Forest
Name: Bob

Re: Is Cyclone Central still up and running?

Postby Wizard9999 » 14 Sep 2015, 15:47

OK thanks Bob, sure if he logs in he'll notice this thread.

Terry.
Wizard9999
Old Oak
 
Posts: 1409
Joined: 08 Aug 2014, 11:51
Location: Eversley, Hampshire
Name: Lord Radford

Re: Is Cyclone Central still up and running?

Postby 9fingers » 14 Sep 2015, 16:58

Wizard9999 wrote:OK thanks Bob, sure if he logs in he'll notice this thread.

Terry.


He has not been in since 1-9-15
Try an email to contact@cyclonecentral.co.uk
Andy P has one of his cyclones if you want independent opinion or make your own from plans on Bill Pentz website.

Bob
Information on induction motors here
https://drive.google.com/file/d/1dBTVXx ... sp=sharing
Email:motors@minchin.org.uk
User avatar
9fingers
Petrified Pine
 
Posts: 10039
Joined: 21 Jul 2014, 20:22
Location: Romsey Hampshire between Southampton and the New Forest
Name: Bob

Re: Is Cyclone Central still up and running?

Postby TrimTheKing » 14 Sep 2015, 17:28

I've got one too.

Mark
Cheers
Mark
TrimTheKing
Site Admin
 
Posts: 7570
Joined: 16 Jun 2014, 13:27
Location: Grappenhall, Cheshire
Name: Mark

Re: Is Cyclone Central still up and running?

Postby Wizard9999 » 14 Sep 2015, 18:24

9fingers wrote:
Wizard9999 wrote:OK thanks Bob, sure if he logs in he'll notice this thread.

Terry.


He has not been in since 1-9-15
Try an email to contact@cyclonecentral.co.uk
Andy P has one of his cyclones if you want independent opinion or make your own from plans on Bill Pentz website.

Bob


I've seen Andy's testimonial on the Cyclone Central website!
Wizard9999
Old Oak
 
Posts: 1409
Joined: 08 Aug 2014, 11:51
Location: Eversley, Hampshire
Name: Lord Radford

Re: Is Cyclone Central still up and running?

Postby Andyp » 15 Sep 2015, 09:07

Can't remember what I wrote but I am very satisfied. I know that Chems does not hold many cyclones for stock, and he does a manufacturing batch 2 or 3 times a year. Drop him a PM both here and on UKW as well as email.

I have the luxury of having the camvac (twin motor) and the cyclone outside the workshop so I know there is no dust coming back in. Although the workshop does get dusty for other reasons.

If I can help at all please don't hesitate.
I do not think therefore I do not am.

cheers
Andy
User avatar
Andyp
Petrified Pine
 
Posts: 11721
Joined: 22 Jul 2014, 07:05
Location: 14860 Normandy, France
Name: Andy

Re: Is Cyclone Central still up and running?

Postby chataigner » 17 Sep 2015, 10:29

I've got one too, it's brilliant. I have a clear plastic bag on the extractor so I can see how much gets past the cyclone, there is perhaps a 2cm layer of fine dust in the bottom of the bag after nearly 2yrs of fairly heavy use.
Cheers !
Chataigner in Périgord-Limousin National park
http://www.rue-darnet.fr
User avatar
chataigner
Old Oak
 
Posts: 1063
Joined: 23 Jul 2014, 08:02
Location: Périgord-Limousin National Park, SW France
Name: David


Return to Machines & Power Toolery

Who is online

Users browsing this forum: No registered users and 13 guests