It is currently 21 Nov 2018, 15:56

Scheppach TS4010 Power Inlet

Here's the place to talk about all your table saws, bandsaws, routers and dust extractors. In fact anything that makes noise and uses electrickery.

Re: Scheppach TS4010 Power Inlet

Postby justaskin » 15 Oct 2017, 07:59

Hi Bob

Didn't use the foil trick as one layer melted, mind you it was £land stuff. Used a sawn down 6" nail :lol:
Richard
You think its difficult try herding cats
User avatar
justaskin
New Shoots
 
Posts: 170
Joined: 23 Jul 2014, 07:08
Location: Shenley Church End MK(the legion of the lost)
Name: Richard

Re: Scheppach TS4010 Power Inlet

Postby Tusses » 15 Oct 2017, 09:27

We still have an old fuse box in the house and use the old fuse wire. You can still get it.
maybe better than nails and fag paper :lol:
As Bob said , if the house wiring is up to scratch , the main fuse box should have it covered.
Tusses
Old Oak
 
Posts: 1300
Joined: 08 May 2016, 10:48
Location: in the middle of the middle
Name:

Re: Scheppach TS4010 Power Inlet

Postby Tusses » 15 Oct 2017, 09:33

a quick look for the cheapest on ebay 99p including post

maybe keep some in ?

http://www.ebay.co.uk/itm/1-x-Consumer- ... SwR6JZeZus
Tusses
Old Oak
 
Posts: 1300
Joined: 08 May 2016, 10:48
Location: in the middle of the middle
Name:

Re: Scheppach TS4010 Power Inlet

Postby 9fingers » 15 Oct 2017, 09:40

I have rewirable fuses in my workshop. So much more tolerant of short term overloads and yet adequate protection. Ideal as I'm often tinkering with suspect motors and getting them going for people.
Bob
Image
Information on induction motors here
https://drive.google.com/file/d/0B_GZrX ... sp=sharing
Email:motors@minchin.org.uk
User avatar
9fingers
Old Oak
 
Posts: 4632
Joined: 21 Jul 2014, 20:22
Location: Romsey Hampshire between Southampton and the New Forest
Name: Bob

Re: Scheppach TS4010 Power Inlet

Postby wizer » 15 Oct 2017, 17:15

SUCCESS!!

Foil method worked a treat. Motor runs up, sounds good!

Thanks Bob. I'll get it all wired up correctly
wizer
New Shoots
 
Posts: 72
Joined: 22 Jul 2017, 17:48
Location: Crowborough
Name:

Re: Scheppach TS4010 Power Inlet

Postby 9fingers » 15 Oct 2017, 17:23

wizer wrote:SUCCESS!!

Foil method worked a treat. Motor runs up, sounds good!

Thanks Bob. I'll get it all wired up correctly


No Worries Tom
Glad it is firing on all cylinders.
I hate those Shucko connectors. You are well rid of them.
I have one on a Scheppach machine that I must get round to changing.

Bob
Image
Information on induction motors here
https://drive.google.com/file/d/0B_GZrX ... sp=sharing
Email:motors@minchin.org.uk
User avatar
9fingers
Old Oak
 
Posts: 4632
Joined: 21 Jul 2014, 20:22
Location: Romsey Hampshire between Southampton and the New Forest
Name: Bob

Previous

Return to Machines & Power Toolery

Who is online

Users browsing this forum: No registered users and 2 guests