Page 1 of 1
Abrasive paper help.
Posted:
31 Jul 2016, 06:45
by Hudson Carpentry
Hello,
Seems I'm going back on the tools so I'm trying to replenish all the sundries I'm used too.
While using a palm sander I used to buy rhynogrip hook and loop on the roll. Brilliant abrasive but I can't seem to find any to purchase now. EBay just brings up a load of cheap looking paper.
The lads have been using the da discs but it's not the same, the holes in the da disc just cases problems while sanding edges and curves.
Any recommendations for rolls of 115mm wide velcro backed stuff. We use grits 80 120 240 320 500.
Thank you
Re: Abrasive paper help.
Posted:
31 Jul 2016, 08:15
by 9fingers
Ive been converted to Mirka Abranet abrasives for both disc and pad use. Not sure if it is available on the roll but there are several cut sheet sizes available. Not cheap but it really lasts.
Hth
Bob
Re: Abrasive paper help.
Posted:
31 Jul 2016, 09:22
by Deejay
Hudson Carpentry wrote:Hello,
Seems I'm going back on the tools so I'm trying to replenish all the sundries I'm used too.
While using a palm sander I used to buy rhynogrip hook and loop on the roll. Brilliant abrasive but I can't seem to find any to purchase now. EBay just brings up a load of cheap looking paper.
The lads have been using the da discs but it's not the same, the holes in the da disc just cases problems while sanding edges and curves.
Any recommendations for rolls of 115mm wide velcro backed stuff. We use grits 80 120 240 320 500.
Thank you
Try
http://www.turnersworkshop.co.uk/woodtu ... l#AbrasiveCheers
Dave
Re: Abrasive paper help.
Posted:
31 Jul 2016, 09:29
by Rod
Another +1 for Abranet especially if you extraction with it.
Rod
Re: Abrasive paper help.
Posted:
31 Jul 2016, 09:40
by Malc2098
And another +1 for Abranet, especially on the ROS.
Re: Abrasive paper help.
Posted:
31 Jul 2016, 12:22
by RogerS
Abranet every time. Preferably with extraction.
And you can buy it in on the roll.
Re: Abrasive paper help.
Posted:
31 Jul 2016, 20:06
by Hudson Carpentry
I do like abranet but never used them on a palm sander. Any links to rolls? Struggling to find anything.
Sent from my SM-N910F using Tapatalk
Re: Abrasive paper help.
Posted:
31 Jul 2016, 20:10
by Malc2098
Re: Abrasive paper help.
Posted:
31 Jul 2016, 20:22
by Doug
Re: Abrasive paper help.
Posted:
31 Jul 2016, 20:44
by 9fingers
Hudson Carpentry wrote:I do like abranet but never used them on a palm sander. Any links to rolls? Struggling to find anything.
Sent from my SM-N910F using Tapatalk
I get mine from this lot via ebay mainly because they do mixed packs. You might find cheaper for the rolls and single grit packs.
http://www.southernfilters.com/product- ... rka-rolls/Bob
Re: Abrasive paper help.
Posted:
06 Aug 2016, 09:14
by Woodbloke
Hudson Carpentry wrote:I do like abranet but never used them on a palm sander. Any links to rolls? Struggling to find anything.
Sent from my SM-N910F using Tapatalk
Plenty of different sizes of individual sheets as well as rolls at Axminster - Rob