It is currently 28 Mar 2024, 09:29

Smallish dust extractor

Roll up, roll up. Here you will find everything from new workshop designs, through builds to completed workshop tours. All magnificently overseen by our own Mike G and his tremendously thorough 'Shed' design and generous advice.

Smallish dust extractor

Postby MJOriginals » 02 Jun 2019, 13:48

Hi all

I am trying to set up a small down fraught table for sanding small pieces but if I use my current extractor it’s pretty noisy I was wondering if anybody has experience of a quiet extractor that would suit

Martyn
MJOriginals
MJOriginals
Seedling
 
Posts: 44
Joined: 01 Dec 2018, 12:56
Location: Polmont,Falkirk, Scotland
Name: Martyn

Re: Smallish dust extractor

Postby Andyp » 02 Jun 2019, 14:07

For quite and plenty of suckage I would not hesitate to recommend one of the NVQ range by Numatic.

I have had one for 15+ years and it is quite. I have it attached to the Kapex mitre saw and comes on automatically, if I remember to switch it on. It is quieter than the Kapex, only when the dust starts flying to I realise it has not come on.

Something like this
https://www.greenandwhite.co.uk/Numatic ... 900345.htm
I do not think therefore I do not am.

cheers
Andy
User avatar
Andyp
Petrified Pine
 
Posts: 11712
Joined: 22 Jul 2014, 07:05
Location: 14860 Normandy, France
Name: Andy

Re: Smallish dust extractor

Postby MJOriginals » 02 Jun 2019, 14:51

Sorry just read the post again phone did autocorrect yet again
It was a down draught table
Martyn
MJOriginals
Seedling
 
Posts: 44
Joined: 01 Dec 2018, 12:56
Location: Polmont,Falkirk, Scotland
Name: Martyn

Re: Smallish dust extractor

Postby MJOriginals » 02 Jun 2019, 19:49

Hi Andy

Thanks I’ll see if I can find some noise level figured for those and compare my current scheppach is 80 dBa and the best I have found so far is one st 67dBa so about 6 times quieter but I’m still looking
Thanks again for your help
Martyn
MJOriginals
Seedling
 
Posts: 44
Joined: 01 Dec 2018, 12:56
Location: Polmont,Falkirk, Scotland
Name: Martyn

Re: Smallish dust extractor

Postby Andyp » 03 Jun 2019, 06:21

I cant find any DB ratings for mine. I can put an app on my phone and measure myself if you can give me a few days.
I do not think therefore I do not am.

cheers
Andy
User avatar
Andyp
Petrified Pine
 
Posts: 11712
Joined: 22 Jul 2014, 07:05
Location: 14860 Normandy, France
Name: Andy


Return to Workshop Builds

Who is online

Users browsing this forum: Majestic-12 [Bot] and 7 guests