It is currently 28 Mar 2024, 21:23

Grain filling

Help with choosing the right coloured milkpaint to slather all over your new project.

Grain filling

Postby RogerS » 30 Dec 2016, 17:39

Came across these photos that were going to form part of a magazine article. They show some Bubinga (African Satinwood if you want to be posh) with unfilled grain.

Image
Here with some grain filler starting to be applied

Image

(would have helped if I'd taken photos of the same area of timber :( )

and in a contrasting colour

Image
If you look closely you can see that the grain filler has been dragged out in a few places. This next photo using a darker grain filler shows it better. Really got too enthusiastic with the wiping.

Image
If opportunity doesn't knock, build a door.
User avatar
RogerS
Petrified Pine
 
Posts: 13291
Joined: 21 Jul 2014, 21:07
Location: Nearly finished. OK OK...call me Pinocchio.
Name:

Re: Grain filling

Postby 9fingers » 30 Dec 2016, 18:53

I've never tried grain filling Roger. What is the technique? Apply liberally allow to dry and sand the excess off?
Tia
Bob
Information on induction motors here
https://drive.google.com/file/d/1dBTVXx ... sp=sharing
Email:motors@minchin.org.uk
User avatar
9fingers
Petrified Pine
 
Posts: 10038
Joined: 21 Jul 2014, 20:22
Location: Romsey Hampshire between Southampton and the New Forest
Name: Bob

Re: Grain filling

Postby RogerS » 30 Dec 2016, 19:06

Apply with coarse cloth i.e. Curtaining or Hessian in a circular motion, finishing off across the grain. Leave until the ‘wet look’ has gone then wipe off across the grain with a clean coarse cloth to remove the excess. Leave to dry overnight and paper with 150-180 grit sandpaper.

The key is not to apply too much and also the timing before you wipe off to remove the excess.

Jecofil is my favourite brand and they are also very helpful.
If opportunity doesn't knock, build a door.
User avatar
RogerS
Petrified Pine
 
Posts: 13291
Joined: 21 Jul 2014, 21:07
Location: Nearly finished. OK OK...call me Pinocchio.
Name:

Re: Grain filling

Postby RogerS » 30 Dec 2016, 19:13

This is one of my earlier attempts.

Starting to apply it

Image
Wiping it in

Image
Wiping off the excess (too energetically/too late)

Image

The good thing is that you can sand back then re-apply.
If opportunity doesn't knock, build a door.
User avatar
RogerS
Petrified Pine
 
Posts: 13291
Joined: 21 Jul 2014, 21:07
Location: Nearly finished. OK OK...call me Pinocchio.
Name:

Re: Grain filling

Postby Pinch » 30 Dec 2016, 19:45

I've only grain filled once and that was back in 1994 - a walnut display cabinet.

I don't remember it being that difficult to do and I think I only made one application, although it was a messy job. The filler was applied into walnut and burr walnut with a shellac finish. If memory serves, the top consisted of 36 coats of button polish.

Image

Image

Image
In my previous life, I was a tree.
User avatar
Pinch
Old Oak
 
Posts: 2808
Joined: 22 Jul 2014, 21:59
Location: Shropshire.
Name: Paul

Re: Grain filling

Postby Phil » 04 Jan 2017, 13:16

RogerS wrote: They show some Bubinga (African Satinwood if you want to be posh) with unfilled grain.



We know Bubinga as African Rosewood (one of the specie)

The bits that I have used in projects have been very close grain. Nice to work with but a bastward to plane as the grain just changes direction in the middle of the plank.
Tools (router bits and blades) must be super sharp.

Beautiful finish just with a couple of coats of oil. (I posted somewhere the coffee grinder boxes I made)

Some other info.

http://www.rarewoods.co.za/wood-browser/bubinga

https://en.wikipedia.org/wiki/African_rosewood

Ooops...you're right, Phil...my mistake. :oops: At least African Rosewood doesn't smell like Zebrano !
We don't stop woodworking because we grow old, we grow old because we stop woodworking!

https://www.instagram.com/phil_pretoria/
User avatar
Phil
Old Oak
 
Posts: 3499
Joined: 23 Jul 2014, 05:11
Location: Southern Africa 0054
Name: Phil

Re: Grain filling

Postby Phil » 05 Jan 2017, 14:56

Phil wrote:
RogerS wrote: They show some Bubinga (African Satinwood if you want to be posh) with unfilled grain.



We know Bubinga as African Rosewood (one of the specie)

The bits that I have used in projects have been very close grain. Nice to work with but a bastward to plane as the grain just changes direction in the middle of the plank.
Tools (router bits and blades) must be super sharp.

Beautiful finish just with a couple of coats of oil. (I posted somewhere the coffee grinder boxes I made)

Some other info.

http://www.rarewoods.co.za/wood-browser/bubinga

https://en.wikipedia.org/wiki/African_rosewood

Ooops...you're right, Phil...my mistake. :oops: At least African Rosewood doesn't smell like Zebrano !



Roger, you are hi-jacking my reply! :lol: :lol: :lol: :text-threadjacked:
We don't stop woodworking because we grow old, we grow old because we stop woodworking!

https://www.instagram.com/phil_pretoria/
User avatar
Phil
Old Oak
 
Posts: 3499
Joined: 23 Jul 2014, 05:11
Location: Southern Africa 0054
Name: Phil

Re: Grain filling

Postby RogerS » 05 Jan 2017, 15:00

Phil wrote:
Phil wrote:
RogerS wrote: They show some Bubinga (African Satinwood if you want to be posh) with unfilled grain.



We know Bubinga as African Rosewood (one of the specie)

The bits that I have used in projects have been very close grain. Nice to work with but a bastward to plane as the grain just changes direction in the middle of the plank.
Tools (router bits and blades) must be super sharp.

Beautiful finish just with a couple of coats of oil. (I posted somewhere the coffee grinder boxes I made)

Some other info.

http://www.rarewoods.co.za/wood-browser/bubinga

https://en.wikipedia.org/wiki/African_rosewood

Ooops...you're right, Phil...my mistake. :oops: At least African Rosewood doesn't smell like Zebrano !



Roger, you are hi-jacking my reply! :lol: :lol: :lol: :text-threadjacked:



Ooops..sorry. I do have form in this :lol: area
If opportunity doesn't knock, build a door.
User avatar
RogerS
Petrified Pine
 
Posts: 13291
Joined: 21 Jul 2014, 21:07
Location: Nearly finished. OK OK...call me Pinocchio.
Name:


Return to Finishing

Who is online

Users browsing this forum: No registered users and 5 guests