It is currently 28 Mar 2024, 21:17

iTech 01332 250mm Table Saw

Here's the place to talk about all your table saws, bandsaws, routers and dust extractors. In fact anything that makes noise and uses electrickery.

Re: iTech 01332 250mm Table Saw

Postby Andyp » 16 May 2018, 16:22

I meant the top secret cunning plan that Bob came up with that will enable Roger to shift his 600kg TS all on his own.
I do not think therefore I do not am.

cheers
Andy
User avatar
Andyp
Petrified Pine
 
Posts: 11718
Joined: 22 Jul 2014, 07:05
Location: 14860 Normandy, France
Name: Andy

Re: iTech 01332 250mm Table Saw

Postby Phil » 16 May 2018, 16:51

Andyp wrote:I meant the top secret cunning plan that Bob came up with that will enable Roger to shift his 600kg TS all on his own.



It is called the C-A-M Process :lol:

Call A Man
We don't stop woodworking because we grow old, we grow old because we stop woodworking!

https://www.instagram.com/phil_pretoria/
User avatar
Phil
Old Oak
 
Posts: 3499
Joined: 23 Jul 2014, 05:11
Location: Southern Africa 0054
Name: Phil

Re: iTech 01332 250mm Table Saw

Postby Malc2098 » 16 May 2018, 18:41

Well, my cunning plan worked!

Two neighbours, a mate and me, combined age of over 200, and a homemade litter, with a lot of huffing and puffing, we got it from photo 1 to photo 2!

IMG_1681.JPG
Photo 1
(594.99 KiB)


IMG_1682.JPG
Photo 2
(397.24 KiB)
Malcolm
User avatar
Malc2098
Sequoia
 
Posts: 7209
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: iTech 01332 250mm Table Saw

Postby Malc2098 » 22 May 2018, 19:28

Well, I had a free day today, so I started putting it together.

Chinese instruction manuals are not the best, but if you separate all the bits and the nuts, bolts and washers etc, they make sense.

IMG_1693.JPG
(374.7 KiB)


Side panels come off for inspection, cleaning and in this case, access for bolting the upper body to the lower body.

IMG_1695.JPG
(156.85 KiB)
Malcolm
User avatar
Malc2098
Sequoia
 
Posts: 7209
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: iTech 01332 250mm Table Saw

Postby Malc2098 » 22 May 2018, 20:17

Extraction tube fitted.

IMG_1696.JPG
(186.55 KiB)


One extension table fitted. It's dished!!!!

IMG_1697.JPG
(229.18 KiB)


So is the other one!

IMG_1698.JPG
(243.04 KiB)
Malcolm
User avatar
Malc2098
Sequoia
 
Posts: 7209
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: iTech 01332 250mm Table Saw

Postby Malc2098 » 22 May 2018, 20:21

Lets look at the the mitre gauge.

IMG_1699.JPG
(489.91 KiB)


It's got the bits, the washer for the tee slot, micro-adjustable stops for common angles and the pin to lock against them.

IMG_1700.JPG
(439.27 KiB)


There's a bit of lateral movement in the slot, but I think that can be removed with some tape to shim it.
Malcolm
User avatar
Malc2098
Sequoia
 
Posts: 7209
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: iTech 01332 250mm Table Saw

Postby Malc2098 » 22 May 2018, 20:28

The rip fence came in its own box.

IMG_1701.JPG
(286.91 KiB)


With all these bits.

IMG_1702.JPG
(319.36 KiB)


They fit together quite nicely, but a couple of the bolts to fix the front and back fences to the table were so close to other brackets on the upper table that knuckle scraping could have been a possibility.

And that's the rip fence done, apart from the micr-adjuster.

IMG_1703.JPG
(343.98 KiB)


IMG_1705.JPG
(307.22 KiB)
Malcolm
User avatar
Malc2098
Sequoia
 
Posts: 7209
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: iTech 01332 250mm Table Saw

Postby Malc2098 » 22 May 2018, 20:30

While I was on a roll, I decided to put the dust extractor together.

IMG_1706.JPG
(328.6 KiB)


And this is what it turned out like.

IMG_1707.JPG
(300.37 KiB)
Malcolm
User avatar
Malc2098
Sequoia
 
Posts: 7209
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: iTech 01332 250mm Table Saw

Postby Coley » 22 May 2018, 21:23

Looks like a well built machine.That's gonna be one fine workshop once you get everything in place. Very smart !

Sent from my SM-G900F using Tapatalk
User avatar
Coley
Sapling
 
Posts: 330
Joined: 26 Jul 2014, 20:03
Name:

Re: iTech 01332 250mm Table Saw

Postby DaveL » 22 May 2018, 21:46

That is coming together nicely.
Regards,
Dave
My tool kit is almost complete, only a few more to get.
User avatar
DaveL
Old Oak
 
Posts: 1918
Joined: 21 Jul 2014, 21:07
Location: Sudbury, Suffolk
Name: Dave

Re: iTech 01332 250mm Table Saw

Postby StevieB » 22 May 2018, 22:15

Nice - dunno why but I was expecting it to be white/grey, probably because the SIP01332 is :eusa-think: Quite like the blue!
StevieB
Nordic Pine
 
Posts: 886
Joined: 21 Jul 2014, 21:47
Location: Chatteris, Cambridgeshire
Name:

Re: iTech 01332 250mm Table Saw

Postby Malc2098 » 23 May 2018, 09:04

Thanks, Gents.

Electrician's been his morning.

Guess what!

He's tested and signed it off!

Yay! (as they say on soshul meejya)
Malcolm
User avatar
Malc2098
Sequoia
 
Posts: 7209
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: iTech 01332 250mm Table Saw

Postby RogerS » 23 May 2018, 09:15

What are you proposing to do re the dishing ?
If opportunity doesn't knock, build a door.
User avatar
RogerS
Petrified Pine
 
Posts: 13291
Joined: 21 Jul 2014, 21:07
Location: Nearly finished. OK OK...call me Pinocchio.
Name:

Re: iTech 01332 250mm Table Saw

Postby Malc2098 » 23 May 2018, 09:27

RogerS wrote:What are you proposing to do re the dishing ?


I'm not sure. I recognise this isn't a high end trade/industrial model, but an entry level hobby model.

I think I will send S&S an email with the photos and see what they say, but I'm not holding out much hope with my experience of them so far.
Malcolm
User avatar
Malc2098
Sequoia
 
Posts: 7209
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: iTech 01332 250mm Table Saw

Postby Andyp » 23 May 2018, 09:39

I'd be interested to know what problems you can expect from having the tables dished like that.
I do not think therefore I do not am.

cheers
Andy
User avatar
Andyp
Petrified Pine
 
Posts: 11718
Joined: 22 Jul 2014, 07:05
Location: 14860 Normandy, France
Name: Andy

Re: iTech 01332 250mm Table Saw

Postby Rod » 23 May 2018, 09:40

I suppose dishing on the extension sections are not too critical.
Are you going to buy anymore accessories?

Rod
User avatar
Rod
Old Oak
 
Posts: 4471
Joined: 21 Jul 2014, 21:34
Location: Winchester, Hampshire
Name:

Re: iTech 01332 250mm Table Saw

Postby Malc2098 » 23 May 2018, 09:42

I'm not sure what problems I can expect, it just doesn't look right when the two faces meet at the ends but not in the middle. It's possible they could mark the workplace passing over the join.
Malcolm
User avatar
Malc2098
Sequoia
 
Posts: 7209
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: iTech 01332 250mm Table Saw

Postby Malc2098 » 23 May 2018, 09:43

Rod wrote:I suppose dishing on the extension sections are not too critical.
Are you going to buy anymore accessories?

Rod


Not at this stage, Rod. What are you suggesting?
Malcolm
User avatar
Malc2098
Sequoia
 
Posts: 7209
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: iTech 01332 250mm Table Saw

Postby TrimTheKing » 23 May 2018, 09:47

I had the same with my Fox TS, if memory serves I heated the table in the middle, gently, then jacked the middle up to take some of the bend out. That did a reasonable job but not perfect, so I then attached the extension with the lowest spot level with the main table, then used a straightedge (wide one) with heavy then medium grit paper attached to sand the cast iron down level.

Took a fair bit of work and the WIP was lost with the old Haven.

My other thought was to create a flat frame from angle iron around the perimeter of the whole table, attach some flat, straight bars to the bottom of my router and to use that as a makeshift mill to mill the table flat. I would use an old router bit and prepare for it to be wrecked, but going slowly with light passes and a router will eat up cast iron no problem.
Cheers
Mark
TrimTheKing
Site Admin
 
Posts: 7567
Joined: 16 Jun 2014, 13:27
Location: Grappenhall, Cheshire
Name: Mark

Re: iTech 01332 250mm Table Saw

Postby RogerS » 23 May 2018, 11:03

Get it ground down by an engineering company who do cylinder heads ?
If opportunity doesn't knock, build a door.
User avatar
RogerS
Petrified Pine
 
Posts: 13291
Joined: 21 Jul 2014, 21:07
Location: Nearly finished. OK OK...call me Pinocchio.
Name:

Re: iTech 01332 250mm Table Saw

Postby Malc2098 » 28 May 2018, 09:46

Still not heard back from S&S about the dishing, but I suppose it is a BH weekend.

I've had a little play squaring up the plywood sheets that formed its casing and it's nice. Well, anything like this would be nicer that the Record ally table shaking all over the place.

Ian's casing looks identical, even to where holes are drilled in the body.
Malcolm
User avatar
Malc2098
Sequoia
 
Posts: 7209
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: iTech 01332 250mm Table Saw

Postby Bucks woodshop » 28 May 2018, 11:49

I think its basically the same saw with the sip obviously having very expensive paint

I think ill look at itech in future as the extra cost was not inconsequensial

although i did see the wheel kit and sliding table were more expensive on the itech which is weird

Im happy though and the motor is so silent the extractor drowns it out :)

Sent from my SM-G935F using Tapatalk
do or do not do there is no try - Yoda , the dagobah system
Bucks woodshop
New Shoots
 
Posts: 68
Joined: 14 May 2018, 15:15
Location: aylesbury bucks
Name: ian

Re: iTech 01332 250mm Table Saw

Postby Malc2098 » 28 May 2018, 13:23

Mine, too.
Malcolm
User avatar
Malc2098
Sequoia
 
Posts: 7209
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: iTech 01332 250mm Table Saw

Postby Bucks woodshop » 07 Jun 2018, 04:19

Did they do anything about the dishing malc ?

Also on a side note im looking at a zero clearance insert plate you thought about it yet ? Existing plate is very thin though with no leveling mechanism so im coming up blank with a suitable material that does everything

Sent from my SM-G935F using Tapatalk
do or do not do there is no try - Yoda , the dagobah system
Bucks woodshop
New Shoots
 
Posts: 68
Joined: 14 May 2018, 15:15
Location: aylesbury bucks
Name: ian

Re: iTech 01332 250mm Table Saw

Postby Malc2098 » 07 Jun 2018, 09:33

They asked for photos which I’ve sent, but I’ve not heard back, so I’ll chase them up.

I haven’t thought about the insert plate yet. I’ve got other jobs on. But I did buy a couple of cheap dense plastic chopping boards a sliced them for the grooves.
Malcolm
User avatar
Malc2098
Sequoia
 
Posts: 7209
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

PreviousNext

Return to Machines & Power Toolery

Who is online

Users browsing this forum: No registered users and 14 guests