It is currently 15 Dec 2018, 03:40

Mike's extension & renovation (wood turning)

This is where we don't want anything but evidence of your finest wood butchering in all its glorious, and photograph laden glory. Bring your finished products or WIP's, we love them all, so long as there's pictures, and plenty of 'em!

Re: Mike's extension & renovation (Lounge roof)

Postby Mike G » 02 Nov 2018, 16:10

Thanks Michael. Kind words.

You deserve a medal for ploughing through that lot!!
User avatar
Mike G
Old Oak
 
Posts: 3741
Joined: 30 Jul 2014, 22:36
Location: Somewhat less of a hovel
Name:

Re: Mike's extension & renovation (Lounge roof)

Postby Karookop » 06 Nov 2018, 17:51

Mike, as usual following your progress and the wide spectrum of your skills, my respect for what you have achieved so far. From early days dismantling the old structures and not always in the knowing of exactly what to expect, you always had solid solutions, executed in quality of work and material. Never cutting corners. (That we know of.. :) )
It is good to see the house is becoming proper home now, tamed and upgraded in style with a good mix of saving and preserving some of the ancient efforts the previous inhabitants and builders had contributed.
One thing that runs through all like a silver string is your excellent planning upfront and how things matched and lined up in the end.
So with all these accolades, when you have time again, please update us here in SA what the progress/plans are on your braai (barbeque for your friends in England)! Hope one day I can do a lekker South African braai for you at your home.
Well done!! :obscene-drinkingcheers: :eusa-clap:
Carel.
Karookop
Seedling
 
Posts: 14
Joined: 19 Jun 2015, 19:49
Location: Stellenbosch, South Africa
Name: Carel Kriek

Re: Mike's extension & renovation (Lounge roof)

Postby Mike G » 06 Nov 2018, 20:12

Thank you Carel. Nice to hear from you again.

I had a little think about the braai a day or two back, funnily enough. There are some awkward bits of brickwork to do where the curved walls meet the sides, and I scratched my head a bit over those for a few minutes. It certainly won't be happening until next year......well, next spring at the earliest. But if you are actually in the UK before I finish building it there is of course a really good temporary BBQ made from an old compressor cylinder which will do perfectly well for some pap en sous, boerwors, and a chop or two. Of course, with the braai we have some decent beers, which is something you guys struggle with. ;)

You're always welcome.
User avatar
Mike G
Old Oak
 
Posts: 3741
Joined: 30 Jul 2014, 22:36
Location: Somewhat less of a hovel
Name:

Re: Mike's extension & renovation (Front door stuff)

Postby Mike G » 21 Nov 2018, 13:33

Finally, after a 10 week wait, 4 keyed-alike sash locks arrived, and that triggered a bit of activity at the front door. First of all, we don't have a bell or a knocker.

That's a funny shaped piece of wood, Mike:

Image

Image

The bell pull had to be mounted in an unorthodox way because of the arched braces for the porch canopy, with the top element being rotated 90 degrees from the lower piece. Hence the funny shaped piece of oak:

Image

Image

The bell pull itself is a really nice bit of casting, but the screw thread used to join the two halves of the rod was appalling, and failed immediately. I welded it together instead:

Image

Three metres away, inside, is the bell. There are various pulleys in between:

Image

The awful stretchy nylon cord supplied with the bell will be replaced with some twisted wire cable (actually picture hanging wire) when that arrives.

Now, the lock/ latch. Firstly, the door is an inch thick boarded door, so a sash lock won't work in the ordinary way. A rim lock would be the usual answer, but the other three outer doors need a sash lock, and you can't get a sash lock and a rim lock on the same key without paying many hundreds of pounds so......

Image

Image

Image

Image

Image

I then glued that all up:

Image

Whilst the glue was drying, I decided I needed part of a wheelbarrow for the lock issue:

Image

Image

Image

The following day I cleaned up the lock box, then did some drilling etc:

Image

Image

Image

Image

Image

That's the woodwork done for the box. I set to with a file and hacksaw to sort out the metalwork:

Image

I found a collection of gorgeous square headed black screws:

Image

With a little box for the keep, it was time to screw that lot to the door (with the metalwork just resting in place):

Image

After a bit of tiffling to get everything working smoothly, I obtained some old engine oil from my friendly local garage:

Image

It wasn't really possible to take photos whilst using a blow-torch to get the metal glowing dull red, then plunging it repeatedly into the oil, burning off the excess, and repeating, but I did stop half-way through so that the before and after was obvious:

Image

Once cool, I wiped them off, and screwed them in place:

Image

Unfortunately those were all the screws I had, so I had to shorten some hand-made nails and use them at the ends of the straps:

Image

Image

Image

Ideally, I would have liked a big black doorknob (and separate escutcheon) rather than a monkey-tailed handle, but I couldn't find any big ones with a return spring in them, which was essential for this latch.
User avatar
Mike G
Old Oak
 
Posts: 3741
Joined: 30 Jul 2014, 22:36
Location: Somewhat less of a hovel
Name:

Re: Mike's extension & renovation (Front door stuff)

Postby Malc2098 » 21 Nov 2018, 14:20

Oh, that's nice!

'Tiffling'; not a word I came across in Middlesex where I grew up, Buckinghamshire where I spent two careers and Devon where I spent the last one!

Now, faffing, fettling and jiggling I have come across.
Malcolm
User avatar
Malc2098
Old Oak
 
Posts: 2780
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: Mike's extension & renovation (Front door stuff)

Postby Rod » 21 Nov 2018, 14:42

Ingenious but poor wheelbarrow

Rod
User avatar
Rod
Old Oak
 
Posts: 3831
Joined: 21 Jul 2014, 21:34
Location: Winchester, Hampshire
Name:

Re: Mike's extension & renovation (Front door stuff)

Postby Mike G » 21 Nov 2018, 14:45

The wheel barrow was retrieved from a friend's skip for the sole purpose of supplying scraps of steel. It's got a solid wheel, and holes in the bottom that golf balls would fall through.
User avatar
Mike G
Old Oak
 
Posts: 3741
Joined: 30 Jul 2014, 22:36
Location: Somewhat less of a hovel
Name:

Re: Mike's extension & renovation (Front door stuff)

Postby Rod » 22 Nov 2018, 00:35

I was only joshing Mike though I have a fondness for old metal wheelbarrows. I fished mine out of the River Wey back in 1970. It’s been outside ever since and still going strong, though it’s had a replacement wheel and tyre.

Rod
User avatar
Rod
Old Oak
 
Posts: 3831
Joined: 21 Jul 2014, 21:34
Location: Winchester, Hampshire
Name:

Re: Mike's extension & renovation (Front door stuff)

Postby Malc2098 » 22 Nov 2018, 11:12

Rod wrote:I was only joshing Mike though I have a fondness for old metal wheelbarrows. I fished mine out of the River Wey back in 1970. It’s been outside ever since and still going strong, though it’s had a replacement wheel and tyre.

Rod



Sounds a bit like Trigger's broom! :lol:
Malcolm
User avatar
Malc2098
Old Oak
 
Posts: 2780
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: Mike's extension & renovation (wood turning)

Postby Mike G » 26 Nov 2018, 21:31

Yeah righto! :)

There is some actual woodturning here, but not by me. DaveL of this parish turned up some pegs for me many months ago from some of my scrap oak, and with the front doors now in use we need somewhere to hang coats and the dog leads. Here is one of Dave's pegs:

Image

The 16mm tenon needs to go into a hole in the porch frame, but I wanted it at an angle. Obviously this doesn't suit the square shoulders. I made up a jig to guide the spade bit, and drilled all the holes. I also drilled a hole in some scrap, and counterbored around it so I could knock the peg in far enough:

Image

Then each peg was fitted in and the shoulders re-cut to suit the slope:

Image

Image

Image

Finally, I bashed 15 of them into place, friction fit only:

Image

Image

Image

Huge thanks, Dave. We get there in the end!
User avatar
Mike G
Old Oak
 
Posts: 3741
Joined: 30 Jul 2014, 22:36
Location: Somewhat less of a hovel
Name:

Re: Mike's extension & renovation (wood turning)

Postby Malc2098 » 26 Nov 2018, 21:47

Nice.

Remind me of dolly pegs.
Malcolm
User avatar
Malc2098
Old Oak
 
Posts: 2780
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: Mike's extension & renovation (wood turning)

Postby TrimTheKing » 27 Nov 2018, 00:30

Lovely Mike, really nice.
Cheers
Mark
TrimTheKing
Site Admin
 
Posts: 3929
Joined: 16 Jun 2014, 13:27
Location: Grappenhall, Cheshire
Name: Mark

Re: Mike's extension & renovation (wood turning)

Postby Mike G » 27 Nov 2018, 09:24

Thanks guys. I remember a rather indelicate expression from my youth which referenced "chapel hat-pegs", and believe I may have produced a similar look here. They'll look so much better when the porch is properly paneled and plastered.
User avatar
Mike G
Old Oak
 
Posts: 3741
Joined: 30 Jul 2014, 22:36
Location: Somewhat less of a hovel
Name:

Re: Mike's extension & renovation (wood turning)

Postby Andyp » 27 Nov 2018, 09:44

They could equally be called Shaker. Whatever you call them they look good.
cheers

Andy

if images are not visible on my posts it is because Photobucket withdrew their free hosting service. I will reload images to the most recent threads in due course. Please drop me a PM if you would like to see anything before then
User avatar
Andyp
Sequoia
 
Posts: 5263
Joined: 22 Jul 2014, 07:05
Location: 14860 Normandy, France
Name: Andy

Re: Mike's extension & renovation (wood turning)

Postby DaveL » 27 Nov 2018, 09:52

I am pleased they look so good fitted. The challenge for me was turning them all the same, makes me relise skill of a production turner, being able to quickly produce lots of multiple copies of the job.
Regards,
Dave
My tool kit is almost complete, only a few more to get.
User avatar
DaveL
Old Oak
 
Posts: 1020
Joined: 21 Jul 2014, 21:07
Location: Sudbury, Suffolk
Name: Dave

Re: Mike's extension & renovation (wood turning)

Postby TrimTheKing » 27 Nov 2018, 10:06

Mike G wrote:Thanks guys. I remember a rather indelicate expression from my youth which referenced "chapel hat-pegs", and believe I may have produced a similar look here. They'll look so much better when the porch is properly paneled and plastered.


It’s getting to that time of year again where ‘chapel hat pegs’ will be regularly visible in the wild...
Cheers
Mark
TrimTheKing
Site Admin
 
Posts: 3929
Joined: 16 Jun 2014, 13:27
Location: Grappenhall, Cheshire
Name: Mark

Re: Mike's extension & renovation (wood turning)

Postby 9fingers » 27 Nov 2018, 10:11

TrimTheKing wrote:
Mike G wrote:Thanks guys. I remember a rather indelicate expression from my youth which referenced "chapel hat-pegs", and believe I may have produced a similar look here. They'll look so much better when the porch is properly paneled and plastered.


It’s getting to that time of year again where ‘chapel hat pegs’ will be regularly visible in the wild...


True but ones to match the size and style of Mike's would be outstanding and worth seeing in the wild or domestically tamed! :lol:

Bob
Image
Information on induction motors here
https://drive.google.com/file/d/0B_GZrX ... sp=sharing
Email:motors@minchin.org.uk
User avatar
9fingers
Old Oak
 
Posts: 4708
Joined: 21 Jul 2014, 20:22
Location: Romsey Hampshire between Southampton and the New Forest
Name: Bob

Re: Mike's extension & renovation (wood turning)

Postby TrimTheKing » 27 Nov 2018, 11:08

9fingers wrote:
TrimTheKing wrote:
Mike G wrote:Thanks guys. I remember a rather indelicate expression from my youth which referenced "chapel hat-pegs", and believe I may have produced a similar look here. They'll look so much better when the porch is properly paneled and plastered.


It’s getting to that time of year again where ‘chapel hat pegs’ will be regularly visible in the wild...


True but ones to match the size and style of Mike's would be outstanding and worth seeing in the wild or domestically tamed! :lol:

Bob


Indeed they would be a sight to behold!!
Cheers
Mark
TrimTheKing
Site Admin
 
Posts: 3929
Joined: 16 Jun 2014, 13:27
Location: Grappenhall, Cheshire
Name: Mark

Re: Mike's extension & renovation (wood turning)

Postby Malc2098 » 27 Nov 2018, 11:09

There you go. You boys are getting smutty again! :eusa-naughty:
Malcolm
User avatar
Malc2098
Old Oak
 
Posts: 2780
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: Mike's extension & renovation (wood turning)

Postby Phil » 08 Dec 2018, 13:01

looking good Mike.

Like the door lock idea. :D
We don't stop woodworking because we grow old, we grow old because we stop woodworking!
User avatar
Phil
Old Oak
 
Posts: 1721
Joined: 23 Jul 2014, 05:11
Location: Southern Africa 0054
Name: Phil

Re: Mike's extension & renovation (wood turning)

Postby Phil » 08 Dec 2018, 13:04

Malc2098 wrote:There you go. You boys are getting smutty again! :eusa-naughty:



With winter up North you should be seeing a lot of spotlights :lol:
We don't stop woodworking because we grow old, we grow old because we stop woodworking!
User avatar
Phil
Old Oak
 
Posts: 1721
Joined: 23 Jul 2014, 05:11
Location: Southern Africa 0054
Name: Phil

Re: Mike's extension & renovation (wood turning)

Postby Malc2098 » 08 Dec 2018, 13:53

Phil wrote:
Malc2098 wrote:There you go. You boys are getting smutty again! :eusa-naughty:



With winter up North you should be seeing a lot of spotlights :lol:



Used to be called Foden push starts down here!
Malcolm
User avatar
Malc2098
Old Oak
 
Posts: 2780
Joined: 03 Jul 2016, 11:10
Location: Tiverton
Name: Malcolm

Re: Mike's extension & renovation (wood turning)

Postby Phil » 08 Dec 2018, 16:13

Ok, lets get back on topic! :lol: :lol:
We don't stop woodworking because we grow old, we grow old because we stop woodworking!
User avatar
Phil
Old Oak
 
Posts: 1721
Joined: 23 Jul 2014, 05:11
Location: Southern Africa 0054
Name: Phil

Previous

Return to Projects & WIP

Who is online

Users browsing this forum: No registered users and 2 guests

cron