-
Hi all and welcome to TheWoodHaven2 brought into the 21st Century, kicking and screaming! We all have Alasdair to thank for the vast bulk of the heavy lifting to get us here, no more so than me because he's taken away a huge burden of responsibility from my shoulders and brought us to this new shiny home, with all your previous content (hopefully) still intact! Please peruse and feed back. There is still plenty to do, like changing the colour scheme, adding the banner graphic, tweaking the odd setting here and there so I have added a new thread in the 'Technical Issues, Bugs and Feature Requests' forum for you to add any issues you find, any missing settings or just anything you'd like to see added/removed from the feature set that Xenforo offers. We will get to everything over the coming weeks so please be patient, but add anything at all to the thread I mention above and we promise to get to them over the next few days/weeks/months. In the meantime, please enjoy!
-
-
AndyT replied to the thread Wolf bench grinder.Don't forget that Bob 9Fingers left us his detailed notes about motors... -
Here is one made from a jig saw blade just using a grinder and diamond stones. Knife by Pete Maddex, on Flickr Pete
-
AndyT replied to the thread Another tool chest.High resolution cameras and big screens are cruel and unnatural! Those "gaps" will disappear in real life.
-
A little more of the same. The top plate has the same joinery as the base, just upside down and with a solid panel. On top of that is...
-
AndyT replied to the thread Chairs - first one glued up.That's a great shame, but as you managed it, you must be pretty darn good at making chair parts, despite their fiddly angles. And I...
-
Somewhere between steps 4-6 may I suggest you pencil mark top and bottom? perhaps even with cross hatching to indicate the edge to be...
-
Friction material is a much better idea than the gravy browning that was applied to the flat belt pulleys on the lathe at school a great...
-
AndyT replied to the thread Dr Al's Latest Folly.👏👏Wow!👏👏
-
I've mentioned a couple of times that one of the remaining jobs on the lathe was to make the little cover flap that goes over the tommy...
-
AndyT replied to the thread Flat belts for old machines.I bought a belt for my treadle lathe from Stationary Engine Parts in York, as suggested by Andy @toolsntat. They have flat belting in...
-
AndyT reacted to Mike G's post in the thread Mike builds a teardrop (drawer fronts, & wardrobes) with
Like.
Out of clamps: I had left the top unshaped until it was glued, and then jig-sawed it, before using a spokeshave and sandpaper to... -
-
AndyT replied to the thread Box for a friend.Lucky friend!
-
AndyT replied to the thread Now for the Chairs.Ah, I was at cross purposes earlier. I thought your planted on pieces would be inside the frame.
-
The batten lines up with the rail. I am planting some quadrant on to the top of the rail rather than rebating the rails.
-
-
Loading…
-
Loading…