It is currently 29 Mar 2024, 16:46
Andyp wrote:That colour is much easier on my eye than the purple you showed us earlier.
Mike G wrote:Dr Al,
could you give me a little guidance, please. I have a project in mind which would need need some parts making on a 3d printer, and before I design them I want to know what limits I am designing within. On a set-up like yours, what is the maximum size of the piece you can make? Is it possible to have "shapes" on all faces, or is it necessary to have something flat-ish on the bottom? One of the things I have in mind needs to be pretty strong, so is it feasible to have flat parts made up in thicknesses of 8 or 10mm, say?
Thanks for any help you can give.
Mike G wrote:Thanks guys........very useful. At the moment these are just pencil sketches, and various scattered thoughts in my brain. I'll narrow in on things in the next week or two, and may then send an email, Dr Al.
Mike G wrote:Thanks guys........very useful. At the moment these are just pencil sketches, and various scattered thoughts in my brain. I'll narrow in on things in the next week or two, and may then send an email, Dr Al.
Mike G wrote:Lots of L-shapes involved with stiffness required in both directions, so this would need a good think.
Cabinetman wrote:Now you just need another one that covers up the workshop keys to remind you to release the tension before you lock up haha. Ian
Return to SketchUp & other 'CAD' Tools
Users browsing this forum: No registered users and 10 guests