• Hi all and welcome to TheWoodHaven2 brought into the 21st Century, kicking and screaming! We all have Alasdair to thank for the vast bulk of the heavy lifting to get us here, no more so than me because he's taken away a huge burden of responsibility from my shoulders and brought us to this new shiny home, with all your previous content (hopefully) still intact! Please peruse and feed back. There is still plenty to do, like changing the colour scheme, adding the banner graphic, tweaking the odd setting here and there so I have added a new thread in the 'Technical Issues, Bugs and Feature Requests' forum for you to add any issues you find, any missing settings or just anything you'd like to see added/removed from the feature set that Xenforo offers. We will get to everything over the coming weeks so please be patient, but add anything at all to the thread I mention above and we promise to get to them over the next few days/weeks/months. In the meantime, please enjoy!

Woodbloke's latest activity

  • Woodbloke
    Woodbloke reacted to Cabinetman's post in the thread 2 measuring questions . with Like Like.
    Yes I’m with Mike, once overall parameters of the thing to be made is set, everything is marked from previously made parts, very rare...
  • Woodbloke
    Woodbloke replied to the thread What size screw is this?.
    I'll have a delve into my screw tub and see if I've got anything - Rob
  • Woodbloke
    Woodbloke reacted to Stuart's post in the thread Veneered wall art with Like Like.
    So I’ve got to make a decision. Either abandon and move on or go down the ‘box’ route. I’m incredibly tempted to try the box but it’s...
  • Woodbloke
    Woodbloke reacted to AndyP's post in the thread My cyclone set up with Like Like.
    With such a lot of talk around Rob’s(Woodbloke) cyclone set up I thought I would share my own system with perhaps more than a nod to Mr...
  • Woodbloke
    Depends on the type of stuff you make, but you'll find that there's a couple of us (moi inc) on WH2 who have no use for a tablesaur and...
  • Woodbloke
    Woodbloke replied to the thread Small cyclone system...WIP.
    My little cyclone project is now finished: Nothing terribly difficult about the trolly, pretty basic glue n'screw construction...
    • IMG_8592.jpeg
    • IMG_8593.jpeg
    • IMG_8594.jpeg
  • Woodbloke
    Woodbloke replied to the thread Small cyclone system...WIP.
    I have the magnet PRV on my big water butt collector which works fine, but I need to fish for the jam jar lid inside the barrel when it...
  • Woodbloke
    As @AndyT found out, a water based Acrylic varnish from Polyvine is one very good alternative and Malc's ukulele finish is another...
    • IMG_8579.jpeg
  • Woodbloke
    Woodbloke replied to the thread Veneered wall art.
    I'd agree with comments thus far, suffice to say that at 1000 x 1700mm that's a big lump of veneering! I've done plenty of veneering as...
  • Woodbloke
    Woodbloke reacted to Steve Maskery's post in the thread Veneered wall art with Like Like.
    Veneer both sides. This is not small-scale veneering and the forces will be significant. How long do you think it will take you? I'm...
  • Woodbloke
    Greetings from Salisbury...look out for the tall pointy cathedral spire - Rob
  • Woodbloke
    Woodbloke replied to the thread Small cyclone system...WIP.
    Seems to be collecting the vast majority of small dust n'debris which is fine. I've been fiddling around fine tuning the PRV for the...
  • Woodbloke
    Woodbloke replied to the thread Small cyclone system...WIP.
    After tea, I lashed the hoses in place with a few strips of tape and gave it a trial run. The PRV worked well, but the choice of spring...
    • IMG_8567.jpeg
    • IMG_8568.jpeg
  • Woodbloke
    Woodbloke replied to the thread Knife handle help.
    Most if not all Japanese chef's knives use a ferrule of some sort (usually horn) with a wooden handle then tapped onto the tang. Many...
  • Woodbloke
    Woodbloke reacted to Doug's post in the thread Small cyclone system...WIP with Like Like.
    Toolovation not cheap & as now I had to wait for them to get it in stock but as my dust extractor is the most used machine in the shop...
Back
Top