• Hi all and welcome to TheWoodHaven2 brought into the 21st Century, kicking and screaming! We all have Alasdair to thank for the vast bulk of the heavy lifting to get us here, no more so than me because he's taken away a huge burden of responsibility from my shoulders and brought us to this new shiny home, with all your previous content (hopefully) still intact! Please peruse and feed back. There is still plenty to do, like changing the colour scheme, adding the banner graphic, tweaking the odd setting here and there so I have added a new thread in the 'Technical Issues, Bugs and Feature Requests' forum for you to add any issues you find, any missing settings or just anything you'd like to see added/removed from the feature set that Xenforo offers. We will get to everything over the coming weeks so please be patient, but add anything at all to the thread I mention above and we promise to get to them over the next few days/weeks/months. In the meantime, please enjoy!

Post a photo of the last thing you made...

Mmmm I did have problems with the second image going blank when I previewed it but it seemed ok when I posted it, anyone else having the same problem?

Pete
 
fiveeyes said:
Nice...how is this adjusted?
Click to expand...
Next to each brass knobs there is a hole and in this hole lives a grub screw, you slacken the brass knob and turn the grub screw for more or less of a cut.
The usual method is a screw underneath each side of the blade, but then you need to remove the blade to adjust it.

Pete
 
SWIMBO has bought more antique Japanese books on netsuke so this set (six in all, 200 years old) required an archive box to store them. Archive board, bookbinding tools and a vast range of covering papers can be purchased from Shepherd's Bookbinders, just behind Victoria Station in Londres. This box has just been finished:

IMG_8369.jpeg

IMG_8370.jpeg

...made in very thin, 1mm thick archive board and covered in hand made Japanese printed washi paper.

There's dozens of 'how to' videos on UToob, but this guy in Australia I think is particularly good and he's got more videos online than Rob Cosman. One of things that's particularly useful for this sort of malarky is the two types of paste:

IMG_8372.jpeg

...sold by Shepherds, a slow (5mins) one for positioning papers and a fast one which will sets card and paper almost instantly. If you have a few minutes to spare, the video clip is well worth a view as there's a lot of precision stuff needed to make these sorts of items - Rob
 
A few recent bits,
Got the oak pelmet fitted.

20260914_101438.jpeg


Fitted a gate, didn’t make the gate as it was so inexpensive made to measure it wasn’t viable.

20260914_134949.jpeg

Got asked for a rustic Oak mantle this was it after some distressing, customer is going to look at it before I apply any finish.

20260909_130529.jpeg

After some though I decided the easiest way to install it was on a French cleat so this is it having a large pocket cnc’ed into the back.



Hopefully the cleat will allow for any shrinkage as the beam is 1.5m long & 270 x 120mm so not completely dry.
 
The first part of the 'V' door has been done on the JK 'V' Door Cabinet in English Walnut. So far, so good but I donned the thinking cap and realised that a raised jig shown below to glue each side at a time:

E6EC63D5-58E5-4EF9-B2EB-E10463CE4975.jpg

...would make life a lot easier and ensure the door was out of 'wind'. The outer sections were glued on today which are 2mm higher that the 'V':

IMG_8638.jpeg

...and once cleaned up:

IMG_8639.jpeg

...the door is coming along nicely. The next job is the centre glazing bar which might prove 'tricky'. Walnut is ever so slightly easier to use than Bubinga. I hate Bubinga! - Rob
 
Last edited:
Some things...

1791632508308.png

The plastic bits were made by the 3D-printer, the 50 mm diameter aluminium bits were turned from 50.8 mm (2") bar by me (and the steel rule was made by Shinwa :) )

1791632512137.png

I don't really know what any of these are - they're for my father. He's in the process of making a weaving loom and asked me to make some bits for him (I'd previously 3D-printed a whole load of pulleys for the same loom. I think the aluminium bits are for some sort of brake (presumably with some string wound around the outside a few times) but that's about the limit of my knowledge on the subject.
 
Last edited:
No clock, wow the pic sure makes it look like a clock. Just a barometer, I brought this home from Southampton in 1992.
Very rustic, whipped this out in 45 mins. Rustic sounds better than not very nice workmanship.
 
What spare time I’ve had recently has been dedicated to sorting out the long term storage of timber I’ve amassed over the years, I posted in the what have I fixed thread the welding up of a new storage rack well this is it fixed in place.20261005_183708.jpeg

All the air dried timber I have has been stored in two lorry bodies at a mates, over the years I’ve kept adding to the collection but time has arrived to straighten up the planks into square edged boards to make for easier storage at home.
First up for the removal of its live edges was quite a bit of Elm seen here stood up at the back of the workshop.

20261013_112348.jpeg


It was then moved to the bottom of the rack along with some maple, this is the newest air dried timber I have at around 6 years old so not really needing sticking


20261013_131922.jpeg

Above that is some sweet Chestnut, it was at this point I realised the gap between the 2 arms was to big as I don’t mind moving a bit of timber getting to the piece I want but I didn’t want to move a 3’ pile so some wedges were made to fit in the ends of the arms.

20261017_162207.jpeg

This allowed for mid supports to be fitted to 2 timber front legs fixed to the wedges, this is as far as I’ve got today.

20261019_125822.jpeg

I’ve still got some tidying up of the timber to do & shuffle it around a bit more as this is less than one lorry bodies worth & Ive another lorry body to empty.

20261019_131650.jpeg
 
Good work around Doug, but as I’m sure you know you will be needing a third and fourth rack the way you’re going lol.
Edit, I had an open fronted wooden box fastened to the wall and anything shorter than 400 mm went into that, this freed up space on my racks and almost as important I knew which pile to look in for Wood of a certain length.
Ian
 
Last edited:
AndyT said:
Wow, that's a serious stash!
Click to expand...
I’ve been collecting a while, I used to write the date on timber as I got it Andy & the earliest date I found as I was clearing out was 2007 thought this was my second lorry body so the next lot will be older, my wife always says I have a problem, but to me it seems a nice problem to have :)
 
duke said:
So, you are in need of another rack Doug?
Click to expand...
I’m hoping not Scott, the Chestnut is for gates that I hope to make this winter along with making a start on a bedroom suite from a lot of the Ash that’s on the rack so by spring I’m hoping to have freed up a fair bit of space & then I’ll bring another load over.
 
Cabinetman said:
Good work around Doug, but as I’m sure you know you will be needing a third and fourth rack the way you’re going lol.
Edit, I had an open fronted wooden box fastened to the wall and anything shorter than 400 mm went into that, this freed up space on my racks and almost as important I knew which pile to look in for Wood of a certain length.
Ian
Click to expand...
Shorter pieces tend to end up on the shelves in the workshop Ian, there are some chunky short pieces of Ash on the rack that need moving elsewhere, I used to turn sofa legs from them for a furniture maker who’s pieces got shipped to America but that work dried up when Trump took office.
 
MattS said:
Wow quite a stash! Do you use it on client projects though, probably not so big if it’s stock for a business!
Click to expand...
No most of this has always been intended for my personal use, almost all of timber I use for work is kiln dried from the timber merchant.
 
You must log in or register to reply here.
Back
Top